| Specification No. | Title |
| ETSI EN 301 489-1 | Common Technical requirements |
| ETSI EN 301 489-2 | Specific conditions for radio paging equipment |
| ETSI EN 301 489-3 | Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz |
| ETSI EN 301 489-4 | Specific conditions for fixed radio links and ancillary equipment |
| ETSI EN 301 489-5 | Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech) |
| ETSI EN 301 489-6 | Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment |
| ETSI EN 301 489-9 | Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices |
| ETSI EN 301 489-11 | Specific conditions for terrestrial sound broadcasting service transmitters |
| ETSI EN 301 489-12 | Specific conditions for Very Small Aperture Terminal, Satellite Interactive Earth Stations operated in the frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS) |
| ETSI EN 301 489-13 | Specific conditions for Citizens Band (CB) radio and ancillary equipment (speech and non-speech) |
| ETSI EN 301 489-14 | Specific conditions for analogue and digital terrestrial TV broadcasting service transmitters conditions for radio paging equipment |
| ETSI EN 301 489-15 | Specific conditions for commercially available amateur radio equipment |
| ETSI EN 301 489-17 | Specific conditions for Broadband Data Transmission Systems |
| ETSI EN 301 489-19 | Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communications |
| ETSI EN 301 489-20 | Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS) |
| ETSI EN 301 489-22 | Specific conditions for ground based VHF aeronautical mobile and fixed radio equipment |
| ETSI EN 301 489-27 | Specific conditions for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P) |
| ETSI EN 301 489-28 | Specific conditions for wireless digital video links |
| ETSI EN 301 489-29 | Specific conditions for Medical Data Service Devices (MEDS) operating in the 401 MHz to 402 MHz and 405 MHz to 406 MHz bands |
| ETSI EN 301 489-35 | Specific requirements for Low Power Active Medical Implants (LP-AMI) operating in the 2 483,5 MHz to 2 500 MHz bands |
| ETSI EN 301 489-50 | Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment |
| ETSI EN 301 489-31 | Specific conditions for equipment in the 9 kHz to 315 kHz band for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P) |
| ETSI EN 301 489-33 | Specific conditions for Ultra Wide Band (UWB) communications devices |
| ETSI EN 301 489-34 | Specific conditions for External Power Supply (EPS) for mobile phones |
| ETSI EN 301 489-51 | Specific conditions for Automotive, Ground based Vehicles and Surveillance Radar Devices using 24,05 GHz to 24,25 GHz, 24,05 GHz to 24,5 GHz, 76 GHz to 77 GHz and 77 GHz to 81 GHz |
| ETSI EN 301 489-52 | Specific conditions for Cellular Communication Mobile and portable (UE) radio and ancillary equipment |